How to repair the membrane structure?

When a newly baked membrane structure capping project appeared in front of us

Get Started >

When a newly baked membrane structure capping project appeared in front of us, I was excited and filled with emotion. But after a period of time, when the membrane surface is no longer new and damaged, does it affect the use? In fact, we can continue to use the damaged membrane structure capping after carefully repairing it. Let's talk about the repair of membrane structure capping today.


1. If only the surface coating of local film material is worn and the fiber of base fabric is intact, high-performance transparent adhesive can be used to paste or heat seal in the wear area.


2. If the length of the damage range of the membrane surface is less than 50mm, cut an elliptical or circular membrane cloth and weld it on the damaged area as a reinforcing layer.


3. If the damage range of the membrane surface is longer than 50mm but less than 300mm, prepare a membrane strip whose length and width are 150mm larger than the damage range and weld it on the membrane surface of the damage area as a reinforcing layer.


4. If the damaged part of the membrane surface is more than 300mm long, the whole damaged unit shall be removed and transported back to the factory for repair or replacement.


  • ENVIRONMENTAL FACILITIES

  • COMMERCIAL FACILITIES

  • AIR DOME STRUCTURES

  • TRANSPORTATION AND TRAFFIC FAC

  • ATHLETIC AND SPORTS FACILITIES

  • LANDSCAPE AND SHADE STRUCTURES

From the Learning Center